Listed prices are for the catalog. For wholesale prices do not hesitate to contact!

Two post asymmetric lift SA40 with mechanical lock release

Model: AMD SA40
For passenger cars

2 post car lift SA40 (electro-hydraulic, asymetric) with mechanical lock release

Main characteristics of the two post lift:

  • Lifting capacity – 4000 kg;
  • Lifting height – 1850 mm;
  • Lock release – mechanical;
  • Protection of feet;
  • “Clear floor” – lifting supports open to provide most driving space;
  • Synchronization on the bottom;
  • Screw-in lifing pads.
  • CE certificate.

Technical specifications of the two post lift:

  • DIstance between posts – 2830 mm;
  • Post height – 2826 mm;
  • Lift width – 3200 mm
  • Lenght of front lifting arms - 712¸1051 mm;
  • Lenght of back lifting arms - 982¸1462 mm;
  • Lift/descent time – 50/20 sek.;
  • Engine power – 2,2 kW.

Two post asymmetric lift SAE40 with electrical lock release

Model: AMD SAE40
For passenger cars

Two post electro-hydraulic asymmetric lift SAE40 with electrical lock release

  • Capacity – 4000 kg;
  • Lifting height – 1850 mm;
  • Lock release – electromagnetic;
  • Maximum limit switch;
  • Protection for legs;
  • Clear entry” – arms can be fully opened to make maximum entry width;
  • Bottom bar;
  • Arms inserted with screw height-adjustable with the possibility of using height extensions;
  • Column cover cloth;
  • Width between columns – 2806 mm;
  • Height of column – 2826 mm;
  • Width of lift – 3160 mm
  • Front arms length - 712:1051 mm;
  • Rear arms length - 982:1462 mm;
  • Lifting/lowering time – 50/20 sec.;
  • Motor power – 2,2 kW;
  • CE certificate.

Model: AMD SAE50
For vans
Product without short description

Two post asymmetric lift SBE-40H with electrical lock release

Model: AMD SBE-40H
For passenger cars

Two post electro-hydraulic asymmetric lift with electrical lock release and „clear“ floor

  • Capacity – 4000 kg;
  • Lifting height – 1900 mm;
  • Lock release – electromagnetic;
  • Maximum limit switch;
  • Protection for legs;
  • Clear entry” – arms can be fully opened to make maximum entry width;
  • Clear“ floor, top bar;;
  • Arms inserted with screw height-adjustable with the possibility of using height extensions;
  • Width between columns – 2806 mm;
  • Height of column – 3900 mm;
  • Width of lift – 3172 mm;
  • Front arms length - 712:1051 mm;
  • Rear arms length - 982:1462 mm;
  • Lifting/lowering time – 60/40 sek;
  • Motor power – 2,2 kW.

Two post car lift NUSSBAUM POWER LIFT HL 2.30 NT

Model: POWER LIFT HF 3500 DT
For passenger cars

Two post electro-hydraulic car lift NUSSBAUM POWER LIFT HL 2.30 NT with hydraulic height locking

Nussbaum Smart Lift 2.40 SL Universal

Video:
Model: SMART LIFT 2.40 SL UNIVERSAL
For passenger cars

SMART LIFT 2.40 SL UNIVERSAL

 

The electromechanical 2 column lift Smart Lift 2.40 SL Universal with spindle, a load capacity of 4000 kg and asymmetrical 2-times telescopic arms is the ideal lift for the price-conscious and demanding car workshop. With its low minimum height and flexible installation width, it fits into any car workshop. The simple cable connection between the columns can either be installed in the floor or via a simple, height-adjustable cable bridge at the top between the columns.

  • Lifting time and lowering time: 40 seconds
  • Load capacity: 4000 kg
  • Adjustable in width and height, low minimum space requirement
  • Ideal for low ceiling heights with minimum height of only 115 mm
  • 5 years warranty on spindle and spindle nut system
  • Compressed air connection and 220 V socket as standard integrated into the column
  • High quality: each unit is individually tested under load before shipment
  • Developed and manufactured in Germany

The Nussbaum Smart-Lift series has proven itself for over 20 years. Today, more than 100,000 Smart Lift lifts are available worldwide to assist car mechanics in their everyday work.

The spindle carrying nut system consists of a rotating spindle and a low-wear lifting nut made of high-quality Nylatron®. A second safety nut under the carrying nut additionally secures the system. The arms are secured by an automatic locking device. The lifting nut can be inspected by the user by means of an easily visible optical wear check.

The columns and support arms are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently azul powder-coated. Your lift is thus protected against dirt and weather in the long term.

 

Installation services

Foundation thickness 200 mm C20 / 25 normal reinforcement, 12 dowels BM12-20 / 80/40 (depending on the foundation, see test book), electrical connection 3 PH, N + PE, 400 V, 50 Hz, protection 16 amperes, air connection for energy Set (option).

Technical characteristics

Capacity - 4000 kg
RAL color - RAL7016 - Grey
Coating - Powder coating
Recommended installation width - 3350 mm
Required ceiling height - 2900 mm
Pick up pad height - 115 - 190 mm
Min length front arm - 570 - 1160 mm
Min length rear arm - 1130 - 1840 mm
Lifting height max. - 2060 mm
Clear distance between columns min - 2650 - 2770 mm
Synchronization system
Column height - 2890 mm
Installation width min. - 3230 - 3350 mm
Total width min - 3230 - 3350 mm
Lifting/lowering time - 40 sec
Clearance height min - 3682 - 4133 mm
Drive-through width min - 2394 - 2514 mm
Drive-through width column min - 2650 - 2770 mm
Drive-through width lifting carriage min - 2394 - 2514 mm
Total height min - 3716 - 4167 mm
Motor power per column - 1,5 KW
Pick up device
E-Set
Compressed air supply
Electrical connection (Ph/V/Hz) - 3Ph, 400 V, 50 Hz
Fuse protection
Foundation length - 3750 mm
Foundation width - 1600 mm
Concrete thickness - 200 mm
Concrete quality - C20/25

SMART LIFT 2.30 SL MM

Video:
Model: SMART LIFT 2.30 SL MM
For passenger cars

SMART LIFT 2.30 SL MM

 

The electromechanical 2 column lift Smart Lift 2.30 SL MM with spindle, a load capacity of 3000 kg and asymmetrical 2-times telescopic arms is the ideal lift for the price-conscious and demanding car workshop. With its low minimum height and flexible installation width, it fits into any car workshop. The simple cable connection between the columns can either be installed in the floor or via a simple, height-adjustable cable bridge at the top between the columns. The Mini Max support plates allow easy access to the pick-up points of lowered vehicles, vehicles with deep-drawn side skirts or off-road vehicles. The support plates can be conveniently raised to the subfloor by foot after swiveling in.

  • Lifting time and lowering time: 40 seconds
  • Load capacity: 3000 kg
  • Adjustable in width and height, low minimum space requirement
  • Ideal for low ceiling heights with minimum height of only 75 mm
  • Height-adjustable Mini Max arms with simple foot control
  • 5 years warranty on spindle and spindle nut system
  • Compressed air connection and 220 V socket as standard integrated into the column
  • High quality: each unit is individually tested under load before shipment
  • Developed and manufactured in Germany

The Nussbaum Smart-Lift series has proven itself for over 20 years. Today, more than 100,000 Smart Lift lifts are available worldwide to assist car mechanics in their everyday work.

The spindle carrying nut system consists of a rotating spindle and a low-wear lifting nut made of high-quality Nylatron®. A second safety nut under the carrying nut additionally secures the system. The arms are secured by an automatic locking device. The lifting nut can be inspected by the user by means of an easily visible optical wear check.

The columns and support arms are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently powder-coated. Your lift is thus protected against dirt and weather in the long term.

 

Installation services

Foundation thickness 200 mm C20 / 25 normal reinforcement, 12 dowels BM12-20 / 80/40 (depending on the foundation, see test book), electrical connection 3 PH, N + PE, 400 V, 50 Hz, protection 16 amperes, air connection for energy Set (option).

Technical characteristics

Capacity - 3000 kg
RAL color - RAL7016 - Grey
Coating Powder coating
Recommended installation width - 3300 mm
Required ceiling height - 2900 mm
Pick up pad height min - 75 mm
Pick up pad height max - 185 mm
Pick up pad height min - 75 - 185 mm
Min length front arm - 600 - 980 mm
Min length rear arm - 1000 - 1480 mm
Lifting height max. - 2020 mm
Clear distance between columns min - 2460 - 2760 mm
Synchronization system
Column height - 2890 mm
Installation width min. - 3000 - 3300 mm
Total width min - 3000 - 3300 mm
Lifting/lowering time - 40 sec
Clearance height min - 3682 - 4133 mm
Drive-through width min - 2226 - 2526 mm
Drive-through width column min - 2460 - 2760 mm
Drive-through width lifting carriage min - 2226 - 2526 mm
Total height min - 3716 - 4167 mm
Motor power per column - 1,5 KW
Pick up device
E-Set
Compressed air supply
Electrical connection (Ph/V/Hz) - 3Ph, 400 V, 50 Hz
Fuse protection
Foundation length - 3700 mm
Foundation width - 1600 mm
Concrete thickness - 200 mm
Concrete quality - C20/25

Model: SPOA3T
For passenger cars
Product without short description

Model: SPO40
For passenger cars
Product without short description

Model: SPOA40
For passenger cars
Product without short description

Model: SPO55E
For vans
Product without short description

Model: SPO65E
For vans
Product without short description

Model: AMI 5,5 VAN
For vans
Product without short description

Automotive 2-post lift POWER LIFT HL 2.40 NT

Model: POWER LIFT HL 2.40 NT
For vans

2-post electro-hydraulic car and minibus lift NUSSBAUM POWER LIFT HL 2.40 NT with hydraulic height lock

2-post minibus lift POWER LIFT HL 2.50 NT

Model: POWER LIFT HL 2.50 NT
For vans

2-post minibus lift NUSSBAUM POWER LIFT HL 2.50 NT with hydraulic height locking

2-post car lift Smart Lift 2.30SL with electronic post synchronization

Model: Smart Lift 2.30SL
For passenger cars

2-post electromechanical car lift NUSSBAUM Smart Lift 2.30SL with electronic post synchronization

Model: SPO40E-EH2 - TSI004
For passenger cars
Product without short description

Model: SPOA3TS-5-EH2 - VAS 6353A
For passenger cars
Product without short description

Model: SPOA3TS-AP-EH2 - VAS 6814
For passenger cars
Product without short description

Model: SPOA40E-5-EH2 - VAS 6354A
For passenger cars
Product without short description

Model: SPO55E-EH2GR - VAS 771017
For vans


Model: SPO65E-LWB - VAS 6355A
For vans
Product without short description

Model: SPOA40M-5-EH2 - SPOA40M-BMW
For passenger cars
Product without short description

Model: SPOA40E-5-EH2 - SPOA40E-BMW
For passenger cars
Product without short description

Model: SPOA3TS-5-EH2
For passenger cars
Product without short description

Model: SPOA3TS-5-MB
For passenger cars
Product without short description

Model: SPOA40E-5-EH1 - SPOA40E-MB-EH1
For passenger cars
Product without short description

Model: SPOA40E-5-EH2 - SPOA40E-MB-EH2
For passenger cars
Product without short description

Model: SPO65E-MB
For vans
Product without short description

Model: SPOA40E-5-EH2
For passenger cars
Product without short description

Model: SPO65E-LWB
For vans
Product without short description